Details - fields
The Details level contains the following steps:
• Readings
◦ Hourly summarized readings
◦ Daily summarized readings
◦ Monthly summarized readings
• Sensors
Readings step
Field | Description | ||
|---|---|---|---|
Identification | |||
Measurement point | Displays the measurement point. | ||
Period | |||
Reading date/time | Displays the sensor system’s last reading date/time. | ||
Normalized date/time reading | Displays the data engine’s last reading date/time in the time zone of the location linked to your measurement point. | ||
Previous normalized date/time reading | Displays the data engine's normalized reading date/time before last. | ||
Occupancy measurements | |||
Occupancy value | Indicates whether the location is occupied. The occupancy value can be: • 0: not occupied • 1: occupied • Null: no information received For more information, see Occupancy measurement. | ||
Passive occupancy | Indicates whether a location is passively occupied: • 0: not passively occupied • 1: passively occupied • empty: not measured See Passive occupancy. | ||
People count | The values in this field can either be: • a digit / number: the actual occupancy value • empty: the sensor system cannot count occupancy For more information, see Occupancy measurement. | ||
People in (cum.) | Displays the (cumulative) value of the inflow of people. The values for this field can be either: • A digit/number: the actual day value for inflow. • Empty: the sensor system cannot measure flow. For more information, see How people flow works. | ||
People out (cum.) | Displays the (cumulative) value of the outflow of people. The values for this field can be either: • A digit/number: the actual day value for outflow. • Empty: the sensor system cannot measure flow. For more information, see How people flow works. | ||
Occupancy status | Displays the status of occupancy of the measurement point: Inactive, Pause, Immeasurable, Not occupied, Idle, Reservation imminent and Occupied. For more information refer to, Occupancy statuses. | ||
Occupancy status change date-time | Displays the date/time of the last change in the occupancy status (based on normalized reading date-time). | ||
Previous occupancy status | Displays the previous occupancy status of the location. | ||
Pause reason | Displays the reason why a measurement point's occupancy status is put on Pause. This is a read-only field that can only be set by the Data Engine. Its values can be: • Connector inactive • Update next polling/event • Outside working hours By including the Pause status, the relevant readings can also be viewed. | ||
Maximum capacity (No.) - [MaximumCapacity] | Enter the maximum occupancy capacity of the location to which you are linking the measurement point. The value entered here will overwrite the default value that is taken over from the linked location.
| ||
Within office hours | Yes indicates that the readings of the measurement point are taken during office hours. (Based on the calendar linked to the measurement point). | ||
Reservation | |||
Person | Displays the person who occupies the location.
| ||
Location reserved | Yes indicates whether there was a valid reservation for the location. | ||
Reservation | Displays the reservation that is active at that time. | ||
No show | Yes indicates that the measurement point experienced a 'No show' event. | ||
Time saving from 'no show' | Displays the net time savings (in minutes) for making a space available by detecting a 'no show'. | ||
Early departure | Yes indicates that the measurement point experienced an 'Early departure' event. | ||
Time saving from 'early departure' | Displays the net time savings (in minutes) for making a space available by detecting an 'early departure'. | ||
Reserved capacity | Displays the number of people for whom the location was reserved. | ||
Measurement point definition - reservation | If this field is filled, the reservation has its own measurement point definition. When the reservation is active, the measurement point uses this definition instead of its default one. This allows different settings, like no-show rules, to be applied based on the reservation type, such as disabling no-show tracking for a training session but enabling it for a team meeting. | ||
Measurements, other | |||
Battery status (voltage) | Displays the battery indication (voltage) received from the connector. The value indicates the status of the sensor's power supply. If multiple sensors are linked to the measurement point, the lowest battery voltage is returned. | ||
Temperature (degrees) | Displays the temperature received from the connector. The measurement point's temperature is given in degrees Celsius or Fahrenheit, which is determined by the sensor system. | ||
Humidity (%) | Displays the humidity percentage received from the connector. | ||
Carbon dioxide (ppm) | Displays the carbon dioxide level received from the connector. The measurement point's carbon dioxide level is given in parts per million (ppm). | ||
Light intensity (lux) | Displays the luminous intensity or lux (lx) received from the connector. | ||
Noise (dB) | Displays the loudness level received from the connector. The measurement point's loudness level is given in decibel (dB). | ||
PM2.5 | Displays the indoor air quality readings of particles less than 2,5 µm in diameter. The value is given in µg/m3. | ||
PM10 | Displays the indoor air quality readings of particles less than 10 µm in diameter. The value is given in µg/m3. | ||
VOCs (ppb) | Displays the reading for volatile organic compounds (VOCs) in parts per billion (ppb). | ||
Radon (pCi/L) | Displays the reading for Radon in picocuries per liter (pCi/L).
| ||
Power level (kWh) | Displays the power level value received from the connector. The power level indicates the energy usage in kilowatt (kWh). | ||
Free field 1/3 for vendor specific readings | Displays any vendor specific values collected from the sensor system. See also Sensor system data > free fields. | ||
Free measurement field 1/10 | Free fields made available for capturing numeric values, e.g. number of particles in a given time frame. This data must be supplied by the sensor system. Because they are numeric values, they can be summarized and used in analysis. | ||
Error | |||
Error code | Displays the error code that is published by the connector when encountering an error situation for the measurement point. | ||
System feedback | Displays an error message if the measurement point is Immeasurable. When monitoring is enabled, this field displays all data exchange (response) collected by the data engine. | ||
