Occupancy statuses
The occupancy status is determined based on the reading value of a measurement point:
Status
Description
Related configurations
Occupied
The location is actively or passively occupied.
When the measurement point is Not occupied, it means it is not actively or passively occupied.
Not occupied
The location is not occupied nor in status "Reservation imminent", "Idle".
Reservation imminent
The location is not occupied but is (soon) reserved based on a Planon reservation.
Determined by:
Pre-reservation time
Allowed delay reservation time
Idle
The location in use by one or more people, who have left the location temporarily.
Determined by:
Idle time reservable location
Idle time non- reservable location
Break time 1-3
Inactive
The location is set to Inactive by a Planon user; no measurements are performed.
Immeasurable
The location is set to Immeasurable by the system; it cannot be measured temporarily. This can have various, technical reasons, such as: a sensor is not available, the web service is not operational.
Pause
Indicates that the measurement time is either:
outside office hours.
the measurement point is waiting to be updated by the next polling cycle.
the connector is inactive.
Measurement point:
Update during office hours only.