Core TSIs : Agile Workplace Management : Data engine : Sensor system data
Sensor system data
The following data is collected from the sensor system for each location to which an active measurement point is linked:
Field
Description
Measurement point ID
Displays the measurement point.
Person ID
Displays the person linked to the sensor system. This field is optional.
Date/time of last reading
Date/time of last reading (server time).
Occupancy value
Indicates whether the location is occupied.
The occupancy value can be:
• 0: not occupied
• 1: occupied
• Null: no information received
For more information, see Occupancy measurement.
Passive occupancy
Indicates whether a location is passively occupied:
• 0: not passively occupied
• 1: passively occupied
• empty: not measured
People count
The values in this field can either be:
• a digit / number: the actual occupancy value
• empty: the sensor system cannot count occupancy
For more information, see Occupancy measurement.
* 
The sensor system determines whether the value 1 just means "Occupied" or whether it means "Occupied by one person". For a description of these values, and how to resolve issues, see AWM Technical Reference.
Free field 1-3 for vendor specific readings
It is possible to store additional vendor data here, if available.
Free measurement field 1/10
Free fields made available for capturing numeric values, e.g. number of particles in a given time frame. This data must be supplied by the sensor system. Because they are numeric values, they can be summarized and used in analysis.
Environmental values
Battery status (voltage)
Displays the battery indication (voltage) received from the connector. The value indicates the status of the sensor's power supply.
If multiple sensors are linked to the measurement point, the lowest battery voltage is returned.
Light intensity (lux)
Displays the luminous intensity or lux (lx) received from the connector.
Carbon dioxide (ppm)
Displays the carbon dioxide level received from the connector. The measurement point's carbon dioxide level is given in parts per million (ppm).
Humidity (%)
Displays the humidity percentage received from the connector.
Noise (dB)
Displays the loudness level received from the connector. The measurement point's loudness level is given in decibel (dB).
Temperature (degrees)
Displays the temperature received from the connector. The measurement point's temperature is given in degrees Celsius or Fahrenheit, which is determined by the sensor system.
Power level (kWh)
Displays the power level value received from the connector. The power level indicates the energy usage in kilowatt (kWh).
Radon (pCi/L)
Displays the reading for Radon in picocuries per liter (pCi/L).
* 
One pCi/L equals 37 Bq/m3. If a sensor is measuring Bq/m, the connector needs to convert this value to pCi/L, the unit the Planon application is expecting.
Error code
Displays the error code that is published by the connector when encountering an error situation for the measurement point.
System feedback
Displays an error message if the measurement point is Immeasurable. When monitoring is enabled, this field displays all data exchange (response) collected by the data engine.