Field | Description |
---|---|
Defect | Select a relevant defect that applies to the survey element. The dialog box displays two options: All: shows all defects in the Defect catalog. Asset defects: shows the list of defects that is linked to the asset / building element associated with the survey element. |
Survey element | This field displays the survey element you drilled down from. If relevant, select another survey element from the dialog box. The dialog box displays two options: All: shows the list of all survey elements from all the surveys. Survey survey elements: shows the list of survey elements that are related to the survey. |
Code | Enter a code for the observed defect. |
Description | This field displays the description of the selected defect. |
Severity | The influence that a defect has on the operability of a construction or an installation. Select a relevant value from the list. |
Intensity | An indicator which marks the phase in which the defect occurs. Condition surveys have three stages. Select a relevant value from the list. |
Extent | Extent is the proportion in which a defect is present in relation to the total surveyed construction or an installation. It can be expressed as an area, a piece, unit of length or a number. Select a relevant value from the list. |
Extent percentage | The extent percentage is automatically calculated based on the extent value. Refer to Survey standard in Supporting data , to look up the extent percentage for a given extent value. This field can be manually changed. Be aware that the Extent field is updated with the extent percentage. |
Condition score | The value is calculated if the Condition score calculation method field on the Survey project is filled with a NEN method. If the Condition score calculation method field is empty, then the condition score on the observed defect is also empty. |
Comment | If relevant, enter a comment on the observed defect of the survey element. |