Adding measurement points
Measurement points are added to their location to be able to store actual reading data received from the connector. A measurement point also displays its occupancy status.
Complete the following steps to add a new measurement point.
Procedure
1. Go to Measurement points > Measurement points.
2. On the action menu, click Add.
3. Complete the fields in the data section.
For a description of these fields, refer to
Measurement point - fields.
4. Click Save.
A new measurement point is added. Now, the actual readings from the data engine can be analyzed. The measurement point readings store the actual readings from the sensoring system.
For information on measurement point reading fields, refer to
Sensor - fields.