Onboarding of measurement points
Complete the following steps to start onboarding.
 | Make sure the (custom managed) connector is set to Inactive. |
Procedure
1. Go to > step, click Add to add an onboarding action and select the required Onboarding class.
This is the reference to the app's onboarding task for onboarding measurement points. Depending on the class you select, it is possible that you can specify settings for onboarding (these settings are app-dependent).
2. Go back to Connectors step and select your Onboarding reference (the reference to the onboarding record you have created in Step 1).
3. On the action panel, click Onboard.
| | The Onboard action is only available if the connector's status is Inactive. |
4. Select one or more properties and click OK.
The onboarding processing is started.
Once the process is completed, the measurement points appear on the Measurement points level and they all have the system status Inactive.
5. After verifying the data, you can select the Active status for the connector.
| | • You can use this process to add new measurement points. • Existing measurement points will not be updated (to prevent overwriting settings). • If a measurement point is deleted and you click Onboard again, it will reappear. |